橡胶止水带是采用天然橡胶与各种合成橡胶为主要原料，掺加各种助剂及填充料，经塑炼，混炼， 压制成型，其品种规格较多，有桥型、山型、P型、R型、U型、Z型、乙型、T型、H型、E型、Q型等。该止水材料具有良好的弹性，耐磨性、耐老化性和抗撕裂性能，适应变形能力强、防水性能好，温度使用范围-45℃-+60℃。当温度超过+70℃，以及强烈的氧化作用或受油类等有机溶剂侵蚀时，均不得使用该产品。

The rubber sealing strip is made of natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through mixing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, R type, U type, Z type, T type, H type, type, E type and Q type etc.. The sealing material has good elasticity, wear resistance, aging resistance and tear resistance. It has strong deformation capacity and waterproof performance, and its temperature range is -45 -+60 C. The product should not be used when the temperature is more than +70 C, as well as the strong oxidation or the corrosion of organic solvents, such as oil.

按型号可分为：CB型橡胶止水带（埋入式中间有孔型）；CP型橡胶止水带（埋入式中间无孔型）；EB型橡胶止水带（外贴式中间有孔型）；EP型橡胶止水带（外贴式中间无孔型）。

According to the type, it can be divided into: CB type rubber water stop (embedded intermediate pass), CP type rubber water stop (buried intermediate no pass), EB type rubber water stop (externally attached middle pass), EP type rubber water stop (externally attached middle pass).

按材质可分为：天然橡胶止水带，氯丁橡胶止水带，三元乙丙橡胶止水带。

According to the material, it can be divided into natural rubber water stop belt, chloroprene rubber water stop belt, three ethylene propylene rubber water stop belt.

按使用情况可分为：中埋式橡胶止水带和背贴式橡胶止水带(外贴式橡胶止水带)、钢边橡胶止水带、遇水膨胀橡胶止水带、平板式止水带

According to the usage, it can be divided into: the buried rubber water stop and the back type rubber water stop (externally attached rubber water stop), the steel side rubber water stop, the water swelling rubber water stop and the flat type waterstop.

橡胶止水带主要用于混凝土现浇时设在施工缝及变形缝内与混凝土结构成为一体的基础工程，如地下设施、隧道涵洞、输水渡槽、拦水坝、贮液构筑物等。

The rubber sealing belt is mainly used for cast-in-place concrete when in construction joints and deformation joints and concrete structure has become one of the basic engineering facilities, such as underground tunnels, culverts, dams, aqueducts, liquid storage structures etc..

橡胶止水带是用来进行止水的;钢边橡胶止水带在橡胶中间焊止水片外面近模板处焊定位片,对于钢边橡胶止水带要求满焊,定位片只要牢固就可以了,定位片距模板要有一到二公分的距离,这之间加塑料或者木质垫片。拆模后剔出,割掉螺杆后用微膨胀砂浆填平。还有种国内少见 就是用短一点的螺杆外加连接螺杆,拆模后可以很方便的拆下。

The rubber sealing strip is used for sealing; steel edged rubber water stop outside the middle rubber waterstop welding near the template at the welding positioning piece, the steel edged rubber water stop full welding requirements, as long as the firm positioning piece can, positioning distance template to one to two cm distance, plastic or wooden pads plus this. After stripping out, cut off after the mortar filled with micro expansion screw. There are kinds of domestic rare connection screw rod is a little shorter, after stripping can be easily disassembled.

橡胶止水带是在混凝土浇注过程中部分或全部浇注埋进混凝土中。在浇埋混凝土以前先要使其在界面部位保持平展，接头部分粘接紧固，再以适当的力充分浇捣，震荡混凝土来定位止水带，使其与混凝土良好的结合，以免影响止水效果。

The rubber water stop belt is partially or completely poured into the concrete during the concrete pouring process. Before pouring the concrete, it is necessary to keep it at the interface part. The joints are fastened and fastened. Then the concrete is fully poured and tamper with the appropriate force. The concrete is positioned by the shock concrete to make the water stop band well combined with the concrete so as not to affect the sealing effect.

用途

purpose

主要用于基建工程、地下设施、隧道、污水处理厂、水利、地铁等工程。为闸门、坝底、建筑工程、地下建筑物等伸缩缝混凝土浇制配用。 QZ系列橡胶作。从而确保工程建筑的使用寿命。

It is mainly used in infrastructure projects, underground facilities, tunnels, sewage treatment plants, water conservancy, subway and other projects. As the gate, bottom and building engineering, underground buildings with concrete joints. QZ series of rubber. So as to ensure the service life of the engineering building.