橡胶止水带技术标准

Technical standard for rubber sealing belt

1、 我公司生产的止水带是采用化工部标准HG／T2288-92组织生产的，尺寸公差一律执行标准，如用户有特殊要求，可按用户要求制造。

1, the watertight belt produced by our company is manufactured by the Ministry of chemical industry standard HG / T2288-92, and the size tolerance is all implemented. If users have special requirements, they can be manufactured according to user requirements.

2、产品型号以类别分类编号，以方便设计参考和用户定货。

2. The product models are classified and numbered to facilitate the design of reference and user order.

3、我公司可按用户要求生产各种形状、尺寸的产品，另外还为不同工程、不同部位的需要备有十字型、丁字型、斜度型和内外转角型产品，可适用于任何设计要求。

3, our company can produce products of various shapes and sizes according to user&＃39;s requirements. Besides, we also have cross, T-type, slope type and inside and outside corner products for different engineering and different parts, which can be applied to any design requirement.

4、产品在运输时，应避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所保持-10℃―+30~C，相对湿度存40％-80％。

4, when the product is transported, the direct sunlight should be avoided, and no contact with the heat source, oil and harmful solvents. The finished product should be put straight, without heavy pressure. The storage place is best maintained at -10 C - +30~C, and the relative humidity is 40%-80%.

止水带作用与原理

Effect and principle of water stop zone

橡胶止带是利用橡胶的高弹性，在各种荷载下产生弹性变形，从而起到坚固密封，有效地防止建筑构造的漏水、渗水并起到减震缓冲作用。在许多工程建筑设计中，土建、水土结构之间都有一定的伸缩要求，并存在防水防震等问题，因此采用安装橡胶止水带是有效地解决以上种种问题的手段。本产品主要用于混凝土现浇时设在施工缝及变形缝内，与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等，确保工程建设的使用寿命。

Is the use of rubber and high elastic rubber, produce elastic deformation under various loads, so as to strengthen the sealing, effectively prevent seepage, Water Leakage construction and play a buffer role. In many engineering building designs, there are some requirements for expansion between civil structures and water and soil structures, and there are problems such as water and shock. Therefore, installation of rubber water stop is an effective way to solve these problems. This product is mainly used for concrete cast-in-place engineering, underground facilities, tunnel culverts, water conveyance aqueducts and water retaining dams, which are built in the construction joints and deformation joints, and ensure the engineering construction life.

止水带施工方法

Construction method of water stop belt

橡胶止水带是在混凝土浇铸过程中部分或全部浇埋进混凝土中。 在浇埋混凝土以前先要使在界面部位保持平展，接头部分粘接紧固，再以适当的力充分浇捣，震荡混凝土来定位止水带，使其与混凝土良好的结合，以免影响止水效果。

The rubber water stop belt is partially or completely buried into the concrete in the process of concrete casting. Before pouring the concrete, we must keep the interface at the interface at the same time. The joints must be bonded and fastened. Then the concrete will be fully poured and tamper with the appropriate force, and the concrete will be positioned by the shock concrete to make it integrate well with the concrete so as not to affect the sealing effect.

橡胶止水带、遇水膨胀止水带

Rubber water stop belt and water swelling stop zone

橡胶止水带、橡胶止水带、橡胶止水带

Rubber water stop belt, rubber sealing belt, rubber water stop belt

钢边止水带、双组份聚硫密封膏（胶）、聚硫密封胶（膏）、遇水膨胀止水带、橡胶止水带

Steel edge water belt, double component polysulfide sealing paste (glue), polysulfide sealant (paste), water swelling water stop belt, rubber water stop belt