橡胶止水带和止水橡皮系以天然橡胶与各种合成橡胶为主要原料，掺加各种助剂及填充料，经塑炼、混炼、压制成型，其品种规格较多，有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。

The rubber sealing strip and sealing rubber, natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, H type, type, E type and Q type etc..

根据使用情况又可分类为埋式橡胶止水带和背贴式橡胶止水带。

According to the use, it can be classified into buried rubber water stop belt and back sticking rubber water stop belt.

该止水材料具有良好的弹性，耐磨性、耐老化性和抗撕裂性能，适应变形能力强、防水性能好，温度使用范围为-45℃-+60℃.

The sealing material has good elasticity, wear resistance, aging resistance and tear resistance. It has strong deformation capacity and waterproof performance. The temperature range is -45 -+60 C.

当温度超过70℃,以及橡胶止水带受强烈的氧化作用或受油类等有机溶剂侵蚀时，均不得使用橡胶止水带。

When the temperature exceeds 70 degrees C, and the rubber water stop zone is eroded by strong oxidation or by the organic solvent such as oil, the rubber sealing belt must not be used.

一般常在地下室外墙和后浇带施工时使用。

Generally, it is often used in the construction of the exterior wall of the basement and the post pouring belt.

适用范围

Scope of application

橡胶止水带主要用于混凝土现浇时设在施工缝及变形缝内与混凝土结构成为一体的基础工程，如地下设施、隧道涵洞、输水渡槽、拦水坝、贮液构筑物等。

The rubber sealing belt is mainly used for cast-in-place concrete when in construction joints and deformation joints and concrete structure has become one of the basic engineering facilities, such as underground tunnels, culverts, dams, aqueducts, liquid storage structures etc..